Description
Filament technical data:
| Diameter: | 1,75 mm |
| Dimensional tolerance: | ± 0,03 mm |
| Density: | 1,27 g/cm³ |
| Net weight: | 1 kg |
| Gross weight: | 1,4 kg |
Spool dimensions:
| Outer diameter: | 200 mm |
| Mounting hole diameter: | 52 mm |
| Width: | 68 mm |
| Weight: | 220 g |
Recommended printing parameters:
| Температура на екструдиране: | 230-250°C |
| Температура на работната маса: | 60-80°C |
| Охлаждане: | 30-80% |
| Скорост на печат: | 30-200 мм/сек |
Recommended drying setting:
| Temperature: | 60-70°C |
| Duration: | 4-8 hours |
Description
3DPower Basic PETG is perfect for users who want to print functional parts. Its popularity is mainly due to the fact that it combines the properties of both PLA and ABS, and is relatively easy to print, and at the same time mechanically durable.
3DPower Basic PETG – versatile!
3DPower Basic PETG filament is a very popular material for 3D printing. It is perfect for users who want to print functional parts. Its popularity is mainly due to the fact that it combines the properties of both PLA and ABS, and is relatively easy to print, while being mechanically durable. PETG filament is made of components approved for contact with food and is 100% recyclable.
The 3DPower PETG filament is characterized by high impact strength, good flexibility, and virtually no shrinkage. The softening point of PETG is much higher than that of PLA, around 75°C. The filament can be used to print elements resistant to chemicals. The prints are characterized by a high gloss surface.
Our filament can be used with most FDM 3D printers. It is perfect not only for people who are just starting their adventure with 3D printing but also for advanced users.
Each spool is packed in a vacuum bag with a moisture absorber.
Reviews
There are no reviews yet.